• Article dans une revue

Enthalpy profile of pH-induced flocculation and redispersion of polyacrylic acid-coated nanoparticles in protic ionic liquid, N,N-diethylethanolammonium trifluoromethanesulfonate

Ryo Kanzaki, Mika Sako, Hitoshi Kodamatani, Takashi Tomiyasu, Clément Guibert, Jérôme Fresnais, Véronique Peyre

Journal of Molecular Liquids, 2022, 349, pp.118146. ⟨10.1016/j.molliq.2021.118146⟩. ⟨hal-03851262⟩

• Article dans une revue

Atomic level characterization and sulfur resistance of unsupported W2C during dibenzothiophene hydrodesulfurization. Classical kinetic simulation of the reaction

Marek Lewandowski, Agnieszka Szymanska-Kolasa, Céline Sayag, Patricia Beaunier, Gérald Djéga-Mariadassou

The stability of unsupported W2C tungsten carbide and its sulfur resistance during hydrodesulfurization (HDS) of dibenzothiophene (DBT) are a specificity of W2C. This material was characterized by X-ray diffraction, specific surface area measurements, HRTEM associated with EDS, lattice images,…

Applied Catalysis B: Environmental, 2014, 144, pp.750-759. ⟨10.1016/j.apcatb.2013.08.011⟩. ⟨hal-00960672⟩

• Article dans une revue

A co-templating route to the synthesis of Cu SAPO STA-7, giving an active catalyst for the selective catalytic reduction of NO

A. Lorena Picone, Stewart J Warrender, Alexandra M Slawin, Daniel M Dawson, Sharon E Ashbrook, Paul A Wright, Stephen P Thompson, Lucia Gaberova, Philip L Llewellyn, Beatrice Moulin, Alexandre Vimont, Marco Daturi, Min Bum Park, Sam Kyung Sung, In-Sik Nam, Suk Bong Hong

Copper cyclam (cyclam = 1,4,8,11-tetraazacyclotetradecane) and tetraethylammonium (TEA(+)) act as co-templates for the hydrothermal crystallisation of the silicoaluminophosphate SAPO STA-7, as determined by UV-visible, ESR and solid-state MAS NMR spectroscopies, powder and single crystal X-ray…

Microporous and Mesoporous Materials, 2011, 146 (1-3), pp.36--47. ⟨hal-01840383⟩

• Communication dans un congrès

Comparative study of natural gas vehicles commercial catalysts in monolith form: on the effect of gas composition and catalyst formulation

Marc Salaün, Sandra Capela, Anita Kouakou, Stéphanie da Costa, Pascal Granger, Patrick da Costa

GDRI "Catalysis for Environment", Sep 2008, Zakopane, Poland. pp.127-129. ⟨hal-00324519⟩

• Article dans une revue

Self-Assembly of Fatty Acids on Hydroxylated Al Surface and Effects of Their Stability on Wettability and Nanoscale Organization

Irma Liascukiene, Marie Steffenhagen, Svajus J. Asadauskas, Jean-François Lambert, Jessem Landoulsi

The self-assembly of fatty acids (FA) on the surfaces of inorganic materials is a relevant way to control their wetting properties. While the mechanism of adsorption on model flat substrate is well described in the literature, interfacial processes remain poorly documented on nanostructured…

Langmuir, 2014, 30 (20), pp.5797-5807. ⟨10.1021/la404756y⟩. ⟨hal-01121646⟩

• Article dans une revue

Nano-engineered hierarchical porous silicas for enhanced catalytic efficiency in the liquid phase

Abdelali Zaki, M. Wastiaux, Sandra Casale, Alexandre Mussi, Jean-François Dhenin, Christine Lancelot, Jean-Philippe Dacquin, Pascal Granger

By tailoring the pore properties (size, morphology and orientation) of hierarchical catalysts, we show experimentally the importance of active phase accessibility on catalytic efficiency. This finding likely contributes to a better rationalisation of the structure sensitivity of the nitrite…

Catalysis Science & Technology, 2018, Catalysis Science & Technology, 8, pp.4604-4608. ⟨10.1039/C8CY00726H⟩. ⟨hal-03042973⟩

• Article dans une revue

Influence of synthesis parameters of SBA-15 supported palladium catalysts for methane combustion and simultaneous NOx reduction

Maya Boutros, María Elena Gálvez, Thomas Onfroy, Patrick da Costa

Several synthesis routes were followed to prepare ordered mesoporous silica, SBA-15, and alumino-silica, Al–SBA-15, supported palladium catalysts. Synthesis method as well as the nature of precursor used in the preparation of these catalysts strongly determined their physico-chemical features which…

Microporous and Mesoporous Materials, 2014, 183, pp.1-8. ⟨10.1016/j.micromeso.2013.08.031⟩. ⟨hal-01121621⟩

• Article dans une revue

Selective Hydrogenation of 1,3-Butadiene in the Presence of an Excess of Alkenes over Supported Bimetallic Gold-Palladium Catalysts

Antoine Hugon, Laurent Delannoy, Jean-Marc Krafft, Catherine Louis

Supported Au catalysts modified by the addition of low amount of Pd (Au/Pd atomic ratio >= 10), prepared by either codeposition-precipitation (DP) or coimpregnation in excess of solution (IES), result in the formation of bimetallic Au Pd particles that promote the selective hydrogenation of…

Journal of Physical Chemistry C, 2010, 114 (24), pp.10823-10835. ⟨10.1021/jp100479b⟩. ⟨hal-00604724⟩

• Thèse

Influence des paramètres des procédés de fabrication additive métallique sur le comportement en corrosion de l’acier inoxydable 316L, Influence of metal additive manufacturing parameters on the corrosion behavior of 316L stainless steel

Alexis Fouchereau

Ces dernières années, la fabrication additive est devenue une source importante de créativité pour le développement de matériaux complexes qui défient l'utilisation de leurs homologues traditionnels. En fusion laser sur lit de poudre (L-PBF), les propriétés des matériaux sont largement…, In recent years, additive manufacturing has become a significant source of creativity for the development of complex materials which challenge the use of their traditional counterparts. In laser powder bed fusion (L-PBF), the material properties are widely influenced by the process parameters and…

Chimie analytique. Sorbonne Université, 2023. Français. ⟨NNT : 2023SORUS426⟩. ⟨tel-04399403⟩

• Article dans une revue

Mesure de module d'Young d'un film mince à partir de mesures expérimentales de nanoindentation réalisées sur des systèmes multicouches

D. Mercier, V. Mandrillon, M. Verdier, Y. Bréchet

Matériaux et Techniques, 2011, 99, pp.168-178. ⟨hal-00954246⟩